welcome to firmakes.com

Production Technology

» Production Technology

Production Technology

titanium

How to choose materials for titanium screws?

How should we choose materials when we customize titanium screws? In fact, titanium alloy is just to meet different industrial demands. Screws are usually used in different service conditions and at different positions on the machine. The machine also has different requirements on screws’ hardness, flexibility, thermal conductivity and wear resistance. Therefore, when screws and fasteners are customized for customers, …

titanium

Method of polishing titanium bars and titanium alloy and relevant techniques

Method of polishing titanium bars and titanium alloy (1) Fine grinding Regular emery rubber wheels are used to grind the surface of titanium castings and titanium alloy castings. Heat production and damages to the surface of castings should be avoided; the whole surface should be flat and smooth. (2) Barrel grinding Barrel grinding is to place processed castings, abrasives, water …

titanium

Surface hardening treatment on titanium alloy (2)

Following the last article, today we continue to learn about the surface hardening treatment on titanium alloy. Carburization on the surface of titanium alloy produces TiC phase with high hardness. However, adhesion between TiC layer and substrate is very poor, which prevents practical usage. Boronisation on the surface of titanium forging pieces produces TiB2 phase with high hardness, too. According …

titanium

Surface hardening treatment on titanium alloy (1)

The surface hardening of titanium is to improve abrasion resistance, and eliminate the risk of co-adhesion between components when abrasion exists. When hardness is improved, corrosion resistance and fatigue strength are also might be improved. Here enhancement of surface hardness is firstly discussed and then the technique itself and its influence on enhancement of surface hardness are discussed. Now a …

titanium

Introduction to five major principles of machining titanium alloy components

Five major principles of machining titanium alloy components have been discussed recently on the Internet by many insiders. Below information is sort out to share with you and help you learn about relevant knowledge. Introduction to five major principles of machining titanium alloy components 1) Cutting speed Cutting speed is an important factor to influence the blade’s temperature. High cutting …

titanium

Why is it difficult to machine titanium alloy?

Titanium alloy’s machinability is 20-40% of 45# steel’s. If hardness is less than HB300, adhesion of cutters will occur; if hardness is more than HB370, titanium alloy is difficult to machine. Titanium alloy with hardness between HB300-370 is easiest to machine. Main reasons that influence its machinability are as follows. 1) Gas impurities (such as oxygen, nitrogen and hydrogen) have …

welding wire

Welding Wire

Application: Our titanium wires are widely used in chlorine alkali, pure alkali, salt manufacturing in vacuum, aviation spaceflight, desalinizing, nuclear power, petrifaction industry, medication sports equipment and other fields. Chemical Component:(Nominal %) 6AL-4V Eli (Grade 23) Composition Analysis Aluminum: 5.5 – 6.5% Nitrogen (Maximum): 0.03% Vanadium: 3.5 – 4.5% Hydrogen (Maximum): 0.0125% Iron (Maximum): 0.25% Other Elements (Maximum, Each): 0.10% …

Titanium Tubing Pipe for sale

Pure Titanium Tube/Pipe,Titanium Alloy Tube/Pipe

Feature: Low density, High specific strength, Excellent corrosive resistance, Rustless Good thermal stability, Good thermal conductivity, Biological features, plasticity, etc. Applications: Titanium tubes are widely applied to heat exchange equipment, such as tubular heat exchanger, coil heat exchangers, serpentine coil heat exchangers, condensers, evaporators and conveying pipelines and so on. For now, in many nuclear power industries, titanium tubes are …

Titanium Welding Wire Suppliers

Pure Titanium wire,Titanium Alloy wire

Feature: Low density, High specific strength, Excellent corrosive resistance, Rustless Good thermal stability, Good thermal conductivity, Biological features, plasticity, etc. Applications: Titanium wires are mainly applied in the industries of military, medical treatment, sports, glasses, earrings, headwears, electroplating hangers and welding wires and so on. State supplied: Annealed state (M), hot processing state (R) and cold processing state (Y) (annealing …

  • Categories

  • Share

  • Titanium Suppiplier

  • Share